2021 Polaris Slingshot (Slinghini)

$10,000.00

This is it, the only production Lamborghini Aventador front end conversion for the Polaris Slingshot. This is an in-house service that requires the shipping/transport of the clients slingshot to our location for installation. Interested in discussing the purchase of a Slinghini kit?  Please call the shop/store to speak with management at 703.330.8883

Add to Wishlist
Add to Wishlist
[wc_wishlists_button]
Category:
A red car parked in the grass with another car behind it.
A red lamborghini is being loaded on the trailer.
A black and silver car parked in the street
A green car parked in the middle of a parking lot.
A black sports car is parked in the garage.
A green car is driving down the street.
A blue car parked in the garage with two other cars.
A red sports car parked in the grass.
Two green and blue sports cars in a garage.
A green and yellow car is parked in the garage.
A green car parked in the middle of a parking lot.
A car that is painted yellow and black.
A black sports car parked in a garage.
Two cars parked in front of a building.
A green sports car parked in the parking lot.

Description

This is it, the only production Lamborghini Aventador front end conversion for the Polaris Slingshot. This is an in-house service that requires the shipping/transport of the clients slingshot to our location for installation. The “Slinghini” kit will consist of the following components necessary to complete the installation to include:

  •  Hand laid Fiberglass Aventador “Slinghini” front clip
  • 3/4 inch 1/8th wall Steel tube internal-frame and bracing i
  • 1.5 inch tube 1/8th wall sub-frame with adjustable ride height hinges at pivot point in satin powder-coated to match the factory tube chassis
  • 2x precision gas struts to hold front clip in up position for routine service needs
  • Removable center hood insert for more detailed service and accessibility when needed
  • Relocation hardware for hood release lever to inside cockpit
  • Custom hood release strikers used at rear hood factory mirror location
  • Wiring harness
  • Headlight buckets and Scratch resistant lenses
  • DOT Projector upgraded LED Headlights with  integrated High/low beams
  • Custom LED super white DRL lights that double as sequential intergrated amber blinkers and Jeweled white and amber circuit board for incredible startup sequence/effect
  • 8x Heat venting hood inserts in your choice of design (Circular or Hexagon) mesh powder coated gloss black
  • 3x Cool air front vent inserts in your choice of design (Circular or Hexagon) mesh powder coated gloss black with satin black powder coated bezels and stainless steel hardware

This is a complete kit starting at $10,000.00 with all of the above mentioned items installed in a like factory fashion.  Paint will be an optional service/up-charge at a minimum price of $1900.00 and a total cost to be determined with Metricks and the client.  Due to the nature of high performance coatings/paint there are to many variables to set a flat rate. Different colors cost different prices with consideration to single, 2 stage and 3 stage paints, metallic’s, pearl coats, wraps, etc… If the client chooses we can paint the entire slingshot, wheels, match the interior and lower body panels at additional cost as well.  Please inquire directly with management for a quote of services.

These kits are to be installed at our Metricks location and requires precision alignment for proper fit. We can arrange or provide shipping direct to our location if needed at an additional cost. Please inquire for these services.